Advanced application:
• 1.Bounce lighting:Bounce flash means to take photos by bouncing the light off wall or celling to soften the light on the subject,and the shadow shade out,to get more desired picture.
• 2.Use reflection board to take photos:Pull out the refection board and built-in wide panel from the flash head at the same time and then push the built-in wide panel back.In such case,if this product is being used to take photos,it will produce a highlighted point on the eyes of the subject and thus make the eyes charming(catch lights).This function can reach optimal effect when the flash head is up 90 degrees.
• 3.Use wide-angle diffuser:Pull out the built-in wide panel to cover the range of 18mm focal length lens,so as to get more softened and natural lighting effect.
  
  Main Features:
• Guide Number 33
• Flash Modes M, S1, S2
• Tilt 0 - 90 degrees
• Swivel 0 - 270 degrees
• Power Source 4 x AA batteries (not included)
• Recycle Time 0.5 - 5s
• Output Full, 1/2, 1/4, 1/8, 1/16, 1/32, 1/64, 1/128
• Colour Temperature 5600K +/-200K
• Flash Duration 1/800 ~ 1/2000s
  
  Warning:
• Press the mode key to S2 Mode.The mode is applicable for slave flash in order to create many light effects.It is respectively applicable for TTL flash environment.The flash unit won't flash synchronously with the first flash but the second flash from the master flash.
  
  Note:
• The optic light sensor will stop function under M Mode.
• The hotshoe's trigger funtion will stop under S1 and S2 mode.
  
  Specification:
• Dimension: 190 x 75 x 55mm
• Gross Weight: 0.35 kg
  
  Package:
• 1 x Flash light
• 1 x Protecting bag
• 1 x Mini stand
• 1 x User manual

$85.00SGD

Product Code: SPEX3